Undertile Heating
The Devimat®100
The Devimat®100 is a self-adhesive mesh with an ultrathin
heating
cable pre-attached which is just 3.5mm
thick. The mat design not only
enables a fast installation,
but as the heating cables are already spaced
out on the
mesh an even heat is guaranteed across the whole floor,
with no cold ripples. As the mat is so thin, it can be
installed within the
thickness of the tile adhesive adding
no appreciable height to the floor.
The mat is 500mm
wide and is available in various lengths.
Devireg 550
This controller is a combined thermostat and timer
which fits
into a standard 47mm single socket box.
The 550 is programmed
to monitor the floor
temperature using a floor sensor which is supplied
with the controller and Devimat®100.
The 550 is designed to be user friendly and incorporates
a ‘one button
does it all’ technology. Each day can be
programmed individually to switch
on when required
thus ensuring minimal running costs.
SAFETY
The Devimat® heating cable meets the highest UK and
European standards
and is the only thin heating cable
with a complete aluminium earth sheathing.
The earth sheathing that surrounds the heating
conductor is there for your protection and safety and
is essential when installing in your bathroom or
wetroom.
The Devimat®100 is a 100watt/m2 system and has
a maximum temp. output
of 29C making it ideal for
use with the Tilesafe® tanking membrane which
has a maximum temperature rating of 32C.
Please note: Devimat® should not be laid within an area of 125mm
around the waste.
